Solar Wind Load Calculator (IS 875)
Wind Load Calculator
Design wind pressure and structural load per module as per IS 875 Part 3. Adjust any input and the result updates live.
Inputs
Updates liveResults
LiveModerate wind zone
Wind Pressure
N/m²
Uplift / Module
kN
Lateral / Module
kN
Structural Category
Moderate (30–47 m/s)
“IS 875 Part 3 (2015): design wind pressure pd = 0.6Vz². Cp_net = −1.3 for solar panels on flat roofs (uplift). Structural engineer sign-off required for Vz > 47 m/s.”
About the Wind Load (Rooftop)
Wind load is the design pressure the wind exerts on solar modules and their mounting structure. It is the governing load for most rooftop and ground-mount solar in India and sets member sizes, clamp spacing, and foundations — computed per IS 875 Part 3.
Formula
Design wind pressure pd = 0.6 × Vd² (N/m²)
- Vd
- Design wind speed = Vb × k1 × k2 × k3 × k4 (m/s)
- Vb
- Basic wind speed for the location (m/s)
- k1…k4
- Risk, terrain, topography and importance factors
How to calculate it
- 1Get the basic wind speed Vb for the site from IS 875 Part 3 (33–55 m/s across India).
- 2Apply the k1–k4 factors for risk, terrain/height, topography and importance.
- 3Compute the design wind pressure and multiply by the module area and force coefficients to get the load on the structure.
What you can calculate
- IS 875 Part 3
- Uplift & lateral
- Wind pressure
- 6 wind zones
Standards & references
Frequently asked questions
What wind speed are solar structures designed for in India?
Basic wind speeds in IS 875 Part 3 range from 33 m/s to 55 m/s depending on the region (coastal and cyclone-prone zones are highest). The mounting structure and foundations are designed for the resulting design wind pressure at the site.
Ready to build your solar project?
Get free quotes from verified EPCs and installers across India.
You might also need
Pedestal Height
Calculate front and rear pedestal heights for target module tilt on flat rooftops
OpenModule Layout Planner
Plan tables, rows and string configuration for a rooftop array
OpenSetback from Parapet
Calculate minimum module setback from parapet walls to avoid shading
OpenBallast Weight
Calculate ballast required to resist IS 875 Part 3 wind uplift without penetrations
OpenAnchor Bolt Sizing
Determine anchor bolt count, diameter, and embedment depth for structural loads
OpenStructure Material BOQ
Estimate structural steel, channels, clamps and hardware quantities from module count
Open